OctoPrint 2.0.0 is out, with plugin printer connectors and thumbnails
OctoPrint's first 2.x release lets plugins add new ways to connect to printers, adds native thumbnails and printer storage, and now requires Python 3.9 or newer.
Disclosure: Some links in this post are affiliate links. The Tinkerverse may earn a commission if you buy through them, at no extra cost to you.
OctoPrint, the free web interface for running 3D printers, released version 2.0.0 on November 16. It’s the first stable 2.x release, and it follows a release candidate phase that lasted about seven months. If you run OctoPrint, read the upgrade notes before you update, because some older plugins may stop working.
What’s new
The biggest change is how OctoPrint talks to printers. Connections now go through “connectors,” and plugins can add new ones. The old serial connection now lives in a bundled Serial Connector plugin. According to the release post, two more connectors are in the works: one for printers running Klipper with Moonraker, and one for the local API on Bambu Lab printers. They aren’t part of this release.
Other changes in the release post:
- Files stored on the printer itself now show up in OctoPrint’s file manager, and you can move files and folders between storage locations.
- Native thumbnail support, with thumbnails shown in the file manager.
- Print time estimates can come from the printer connector. With the serial connector, OctoPrint now uses M73 commands from your slicer’s G-code.
- Support for Python 3.14 and 3.15.
Before you upgrade
- OctoPrint 2.0.0 requires Python 3.9 or newer. Python 3.7 and 3.8 are no longer supported.
- Long-deprecated code has been removed, so plugins that never updated may break. Plugin authors are pointed to a migration guide.
- If you use the remote user header with an authentication proxy, a new trusted authentication proxy setting replaces the old option, so check your proxy settings first.
The full details and upgrade tips are in the OctoPrint 2.0.0 release post.