3 sources, 4 tags

What's New

Klipper 0.14.0 adds tap probing with eddy current and load cell sensors

The first numbered Klipper release since April 2025 brings nozzle tap probing, more than four axes in G1 moves, faster STM32H7 support and CAN bus on LPC176x boards.

Klipper 0.14.0 is out. The Klipper project lists it as available on November 20, 2026, its first numbered release since 0.13.0 in April 2025.

What’s new

  • Tap probing. Nozzle-to-bed “tap” probing now works with both eddy current and load cell sensors. Z homing with a bed probe now goes through the probing code rather than the endstop code.
  • Motion. Plain G1 moves can drive more than four axes at once, by assigning manual steppers to G-code axis letters. A new general cartesian kinematics module takes user-supplied motion formulas, and the motion planner now stays one second ahead of the hardware instead of two.
  • Faster hosts. Step generation makes better use of multiple CPU cores on the host computer, including a thread per stepper motor.
  • Boards. STM32H7 chips are optimized, with the STM32H723 running at 520 MHz and the STM32H750 at 480 MHz. LPC176x boards gain CAN bus support, and the RP2350B and LGT8F328P are newly supported. I2C errors reported by a board are now passed to the host to handle instead of causing an immediate shutdown.
  • New hardware. Added modules include the ADS131M0x and CS1237 load cell ADCs, the BMI160 accelerometer and the TMC5262 driver.

Before you update

Klipper keeps a separate list of configuration changes, and several since 0.13.0 can affect existing setups. Among them: eddy current probe tap_threshold values must be recalibrated, max_accel_to_decel was removed, the EI, 2HUMP_EI and 3HUMP_EI input shapers were updated with recalibration recommended, and the PID calibration math was corrected. Read the configuration changes page against your printer.cfg before updating.

Full notes are on the Klipper releases page.

Sources

About This Tinkerverse

The Tinkerverse

Lasers, maker tools and whatever else catches a tech geek's curiosity. News, how-tos and projects from The Tinkerverse.

Version
Always tinkering
Memory
640K of curiosity
Status
Probably mid-project
About pageYouTube
Control Panel

Saved on this device

Display

Desktop color

Desktop pattern

Trash

9 items

Secure Access
Command Prompt